Tables
15.1 List of statements
Job planning
15-14 Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
FOCON
Activate travel with limited moment/force m
FOR Counter loop with fixed number of passes
FP Fixed point: number of fixed
point to be approached
Integer, w/o
signs
G75 FP=1 S
FPO Feed characteristic programmed
via a polynomial
(feed polynomial)
Real Quadratic,
cubic
polynomial
coefficient
FPR Identification for rotary axis 0.001, ...,
999999.999
FPR (rotary axis)
FRAME Data type to define the coordinate system Contains for
each geometry
axis:
Offset, rotation,
angle of shear,
scaling,
mirroring;
for each
special axis:
Offset, scaling,
mirroring
FRC, Feed for radius and chamfer s
FRCM, Feed for radius and chamfer, modal m
FTOC Change fine tool offset As a function of
a 3rd order
polynomial
defined with
FCTDEF
FTOCOF
1,6
Online fine tool offset OFF
m 33
FTOCON
6
Online fine tool offset ON
m 33
FXS Travel to fixed stop ON
Integer,
w/o signs
1 = select,
0 = deselect
m
FXST Torque limit for travel to fixed stop
(fixed stop torque)
% Parameter
optional
m
FXSW Monitoring window for travel to fixed
stop (fixed stop window)
mm, inch
or
degrees
Parameter
optional
To Next Page
Loading...
Need help?
General
