Siemens SINUMERIK 810D

12.95
C-137
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) -- 11.02 Edition
Appendix C to the EC Declaration of Conformity
No. E002
The conformity of products to council directive 89 / 336 / EC including updates 91 / 263 / EC, 92 / 31 / EC,
93 / 68 / EC and 93 / 97 / EC was demonstrated by testing them according to the following product s tan-
dard, technical basic standards and the basic standards listed therein. Different standard requirements
apply for the SINUMERIK, SIMOTION, SIMATIC, SIROTEC and SIMODRIVE product categories.
C1 product category SINUMERIK
*
)
, SIMOTION, SIMATIC, SIROTEC:
Technical basic standard radio interference/industrial sector:EN 50081 -2 1)
Basic standards: Test topic:
EN 55011 + A1 + Bbl. 1 2) Radio interference
Technical basic standard immunity to noise/industrial sector:EN 61000-6-2 3)
Basic standards: Test topic:
EN 61000-4-2 + A1 4) Static discharge
EN 61000-4-3 + A1 5) High--frequency irradiation (amplitude modulated)
EN 61000-4-4 6) Rapid transients (burst)
EN 61000-4-6 7) HF flow on c ables
EN 61000-4-8 8) Magnetic fields with electrical power frequencies
EN 61000-4-11 9) Voltage dips and voltage interruptions
C2 Product category SIMODRIVE, SINUMERIK 810D:
Product standard: Test topic:
EN 61800-3 + A11 10) Variable speed electrical drives;
EMC product standard including special test procedures
C3 Standards thus complied with:
1): VDE 0839 Part 81-2 6): VDE 0847 Part 4-4
IEC 61000-4-4
2): VDE 0875 Part 11+ Bbl. 1 7): VDE 0847 Part 4-6
IEC/CISPR 11 + A1 + 28 IEC 61000-4-6
3): VDE 0839 Part 6-2 8): VDE 0847 Part 4-8
IEC 61000--6--2 IEC 61000-4-8
4): VDE 0847 Part 4-2 + A1 9): VDE 0847 Part 4-11
IEC 61000-4-2 + A1 IEC 61000-4-11
5): VDE 0847 Part 4-3 10): VDE 0160 Part 100
IEC 61000-4-3 + A1 IEC 61800-3
J
___________________________________
*)
except SINUMERIK 810D
09.0109.01