Siemens SINUMERIK 840D Programming Manual

Index
Job planning
Index-4 Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
Determining the T number, 8-39
Freely assigned, 8-36
Renaming, 8-38
DC link backup, 13-38
Deactivate/reactivate interrupt routine, 1-50
Deactivation position, 13-22
DEF, 1-4, 1-9, 3-8, 10-67
DEFAULT, 1-34
Default axis identifier
Initialize undefined AXIS type axis variables, 10-13
DEFINE, 2-41, 10-67
Define user data, 3-8
degrees, 9-23, 9-28
DELAYFSTOF, 9-44
DELAYFSTON, 9-44
DELDTG, 5-30, 10-28
DELETE, 1-63
Delete couplings, 13-22
Delete distance-to-go with preparation, 10-28
Deletion of distance-to-go, 10-28, 11-2
DELT, 8-4
Denominator polynomial, 5-20
Deselecting a transformation
TRAFOOF, 7-77
Direct axis replacement
GETD, 1-54
DISABLE, 1-46
Displaying the block number programmed last, 2-23
DISPLOF, 2-36
DISPR, 9-52
DIV, 1-19
DO, 10-3, 10-7, 11-7
DRF, 6-18
DRF offset, 6-18
DRFOF, 6-21
Drive-independent retraction, 13-40
Drive-independent stopping, 13-39
DUPLO_NO, 8-4
DV, 13-19
DZERO, 8-39
E
EAUTO, 5-4
EG
Electronic gear, 13-24
EGDEF, 13-25
EGDEL, 13-29
EGOFC, 13-29
EGOFS, 13-28
EGON, 13-25
EGONSYN, 13-25
EGONSYNE, 13-25
Electronic gear, 13-24
ELSE, 1-37
ENABLE, 1-46
ENAT, 5-4
End angle, 7-36
ENDFOR, 1-37
ENDIF, 1-37
ENDLOOP, 1-37
End-of-motion criterion
Programmable, 5-38
Endpos, 11-6
ENDPROC, 10-37
ENDWHILE, 1-37
ERG, 14-15
ERROR, 14-2
Error checkback message, 14-2
ETAN, 5-4
Euler angle, 8-31
Evaluating 3D circumferential milling on outside
corners
Intersection procedure, 8-24
EVERY, 10-5
EXECSTRING, 1-16
EXECTAB, 14-2, 14-14
EXECUTE, 4-2, 14-2
EXP, 1-19
EXTCALL, 2-27
Extended measuring function, 5-27, 7-68
Extended stop and retract, 13-30
EXTERN, 2-10
External zero offset, 6-19
F
F word polynomial, 5-22
FA, 11-4, 13-21
Face turning
External machining, 14-3
Inside machining, 14-3
FALSE, 1-2
Faxis, 9-3, 9-9, 9-14, 9-23, 9-28, 9-32
FCTDEF, 8-8, 10-30
FCUB, 9-37
Feed
Axial, 10-51
Axis, 11-7
Movement, 11-11
FENDNORM, 5-37
FGROUP, 5-22
FIFO variable, 10-19
File information FILExxxx
read from NCK user memory, 1-67
FILEDATE, 1-67

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB