Commissioning
7.7 Commissioning the device
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
101
[1.6] Save parameter set
7.7.6.1
You can use this menu to save your latest settings in a parameter set. You can use it to
restore any unintentional changes to the parameter assignment. SIPROCESS GA700
devices use two types of parameter sets:
● Factory data: This parameter set is the factory default and is used to restore the original
parameter assignment.
For this reason, factory data can only be loaded.
● User data: This parameter set maps a current, application-specific parameter assignment.
You can save and reload user data at any time.
Save parameter set
Procedure
1. Call up submenu "6. Save parameter set":
Main menu > "1. Quick Start" > "6. Save parameter set"
Use this function to save the current parameter assignment in the device. The data is
saved as "user data".
2. Start save process: "Save parameter set" parameter field.
– Authorize access with Standard PIN, if necessary.
– Follow the instructions in the displayed window.
To Next Page
Loading...
Need help?
General
