Introduction
1.5 Qualified personnel
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
9
The following table provides an overview of the device versions.
Table 1- 2 SIPROCESS GA700 devices with analyzer modules
Rack-mounted device 7MB3000-0****-****
Wall-mounted device 7MB3000-3****-****
Analyzer modules, standard version:
Analyzer modules, high-temperature version:
OXYMAT 7 high-temperature
ULTRAMAT 7 high-temperature
1)
Machine-readable product designation
Persons who install, connect, commission, operate, service, maintain and disassemble the
device must have the following specific qualifications:
● They are authorized and trained or instructed in operating and maintaining devices
and
s
ystems according to the safety regulations for electrical circuits, high pressures a
nd
c
orrosive as well as hazardous media.
● They are trained or instructed in the maintenance and use of appropriate safety
equipment according to the pertinent safety regulations.
1. Check the packaging and the device for visible damage caused by inappropriate handling
during shipping.
2. Report any claims for damages immediately to the shipping company.
3. Retain the damaged parts until clarification.
4. Check the scope of delivery for correctness and completeness on the basis of the
delivery note. Compare the serial numbers on the delivery note with the serial numbers
on the basic device or on the analyzer modules.
5. Check whether the package includes the following items:
– CD-ROM "Manual Collection" CD-ROM "Manual Collection"
– This printed copy of the Compact Operating Instructions (not with loose delivery).
To Next Page
Loading...
Need help?
General
