Siemens SIPROCESS GA700 - Rack-Mounted Device; Device-Specific Safety Instructions

Installing
5.3 Rack-mounted device
34
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
5.3
Rack-mounted device
5.3.1
Device-specific safety instructions
NOTICE
Insufficient air circulation around the device
Device damage
The device may overheat in case of heat accumulation.
• Make sure that sufficient air circulates around the rack-mounted device.
• Do not cover the ventilation slit.
• If you install more than one rack-mounted device, maintain a clearance of one height
unit (4.5 cm) to the next device.
Note
Installation in control cabinets
•
Make sure there is adequate ventilation between the devices when installing in control
cabinets.
•
Make sure that the permitted ambient temperature listed in the technical specifications is
not exceeded.