Siemens SIPROCESS GA700 Quick Start

Commissioning
7.7 Commissioning the device
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
87
7.7.1
[1.1] Input of basic settings
Procedure
1. "1 Quick Start" > "01 Basic settings" main menu
2. Call the parameter display:
Press <Enter>.
3. Set the display language.
If the language of the Quick Start Manual was also set as operating language, this is set
at the factory; otherwise the operating language is English.
Use the "Language" parameter field to select your preferred display language.
4. Setting parameters for date and time:
Note
Effects of changes
Changing the time has a direct effect on the sequence of logbook entries and all other
time
-based device services.
•
Check the logbook entries following changes to this setting. If necessary, reset the
parameters of the logbook filter function.
– Specify display format of the date: "Date format" parameter field.
This parameter field can be edited without PIN input. The following settings ar
e
pos
sible: DD.MM.YYYY, MM/DD/YYYY or YYYY-MM-DD.
– Enter the current date: "Date" parameter field. Authorize access with Standard PIN, if
necessary.
– Enter the current time: "Time" parameter field.
– Enable/disable automatic switching to daylight saving time: "Daylight saving time"
parameter field.
Select one of the options:
Setting
Description
Off
Automatic switching is disabled.
Autom. EU Automatic switching to CEST ("Central European Summer Time") on the last
Sunday in March. The CEST ends on the last Sunday in October.
Autom. US Switching to U.S. DST ("Daylight Saving Time") on the second Sunday in
March. DST ends on the first Sunday in November.
Each change results in a logbook entry that has to be acknowledged or confirmed.
– Enter the date of commissioning: "Commissioning date" parameter field.

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English