Siemens SIPROCESS GA700 - General information; KC Safety note - Information for Korea only; Safety instructions

Safety notes
2
2.1 Preconditions for use
This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the speci󹪝cations relevant
to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
2.1.1 Warning symbols on the device
Symbol Explanation
Consult operating instructions
Hot surface
Dangerous electrical voltage
2.1.2 Laws and directives - including Korea
Observe the test certi󹪝cation, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC Part I) (Canada)
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB 15