Note
Minimum wait time after de-energizing is 10 minutes.
NOTICE
Penetration of moisture into the device
Damage to device.
• Make sure when carrying out cleaning and maintenance work that no moisture penetrates
the inside of the device.
6.2 Safety notes for hazardous areas
WARNING
Dust layers above 5 mm
Risk of explosion in hazardous areas.
Device may overheat due to dust build up.
• Remove dust layers in excess of 5mm.
6.3 Maintenance and repair work
WARNING
Impermissible accessories and spare parts
Risk of explosion in areas subject to explosion hazard.
• Only use original accessories or original spare parts.
• Observe all relevant installation and safety instructions described in the instructions for the
device or enclosed with the accessory or spare part.
Note
Usage of impermissible accessories and spare parts will cause loss of all specicized properties
and warranty claims.
Service and maintenance
6.3Maintenance and repair work
SIPROCESS GA700 rack and wall mounted devices
82 Compact Operating Instructions, 06/2023, A5E35134047-AB
To Next Page
Loading...
Need help?
General
