Siemens SIPROTEC4 7UM62 - Standard mapping 3-1; 2.1 Coil Status registers (0 X references); 2.2 Input Status registers (1 X references); 2.3 Input registers (3 X references)

2-1SIPROTEC Modbus - Bus mapping 7UM62
C53000-L1840-C009-03
Standard mapping 3-1 2
This chapter describes the register map organisation of the Modbus slave of the
SIPROTEC device 7UM62 at use of Standard mapping 3-1.
2.1 Coil Status registers (0X references) 2-2
2.2 Input Status registers (1X references) 2-4
2.3 Input registers (3X references) 2-12
2.4 Holding registers (4X references) 2-13