Siemens SIPROTEC4 7UM62 - Standard mapping 3-2; 3.1 Coil Status registers (0 X references); 3.2 Input Status registers (1 X references); 3.3 Input registers (3 X references)

3-1SIPROTEC Modbus - Bus mapping 7UM62
C53000-L1840-C009-03
Standard mapping 3-2 3
This chapter describes the register map organisation of the Modbus slave of the
SIPROTEC device 7UM62 at use of Standard mapping 3-2.
3.1 Coil Status registers (0X references) 3-2
3.2 Input Status registers (1X references) 3-4
3.3 Input registers (3X references) 3-12
3.4 Holding registers (4X references) 3-13