Siemens SIPROTEC4 7UM62 User Manual

vSIPROTEC Modbus - Bus mapping
C53000-L1840-C009-03
Revision index
Listing of the changes between the editions of this manual:
Modified chapters /
pages
Edition Reasons of modification
1.0 First edition, Doc.-No.: C53000-L1840-C009-03
Oct 23
rd
, 2001
Chap. 1.2.3
Chap. 1.3.26
Chap. 1.3.30 - 1.3.33
Chap. 1.4
Chap. 1.5.6
Chap. 1.5.7
2.0 • Registers 00027 to 00030 for Double commands/Double-point indicati-
ons added (with 7UM62 V4.10 or higher)
• Register 10101: 64R-2 picked up --> 64R-1 picked up
• Additional indications at registers 10116 to 10129 with 7UM62 V4.10
• Register 30012:
ΘR/ΘRmax --> “<user-defined>”
• Registers 40301 to 40324 (Statistic values) new with 7UM62 V4.10
• Registers 40351 to 40410 (Min/Max values) new with 7UM62 V4.10
March 26
th
, 2002
2.1 New: Standard mapping 3-2 (with Event recorder)
Reorganisation of the manual:
• Chap. 1: Descriptions to the Modbus register map organization and
notes for evaluation of selected SIPROTEC-Objects
• Chap. 2: Standard mapping 3-1
• Chap. 3: Standard mapping 3-2
March 17
th
, 2003
Chap. 1.1, 3.2.33, 3.3 2.2 Amount of Single-point indications, available via Input Status registers, and
of Measured values, available via Input registers, changed in Standard
mapping 3-2:
• 129 Single-point indications in mapping version V02.01.01,
126 Single-point indications from mapping version V02.02.01
• 15 Measured values in mapping version V02.01.01,
21 Measured values from mapping version V02.02.01
April 22
nd
, 2004

Siemens SIPROTEC4 7UM62 Specifications

General

Brand	Siemens
Model	SIPROTEC4 7UM62
Category	Conference System
Language	English