Mounting
7.3 Assembly and disassembly with dierent mounting systems
SIRIUS 3RA Load Feeders
100 Equipment Manual, 02/2022, A5E03656507520A/RS-AC/004
Figure 7-46 Mounting on the busbar adapter (reversing starter, screw-type connection system, size S0)
⑤ Screw the main conductor terminals tight.
⑥ Snap the reversing starter onto the busbar adapter.
⑦ Connect the connection cables to the applicable main conductor terminals.
⑧ Slide the positioning piece from below onto the busbar adapter until it engages at the bottom on the contactor.
To Next Page
Loading...
