Menu levels "RUN" and "SET"
The RUN menu shows the up-to-date current measured value ①. You can use the arrow keys
to change between the individual measuring values on devices with multiple outputs. In this
case, the display automatically switches between the name of the measured value and the
actual measured value.
② represents the selected type of monitoring (overshoot, undershoot, or range monitoring). An
arrow symbol indicates whether the measuring value is within, above or below the set
thresholds.
Next to this, one or two symbols ③ represent the type (changeover contact or semiconductor
output) and the switching status of the outputs.
System overview
3.6 Menu-based operation
SIRIUS 3UG4 / 3RR2 monitoring relay
46 Equipment Manual, 07/2021, NEB927043002000/RS-AD/005
To Next Page
Loading...
