Siemens SITRANS F FST030 - Document History; Device Documentation Package

Introduction
1.2 Document history
SITRANS F Ultrasonic flowmeters FST030 (HART)
8 Operating Instructions, 08/2017, A5E35971532-AC
1.2
Document history
The following table shows major changes in the documentation compared to the previous
edition.
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
Note
08/2017
•
Chapter: Safety notes. Use in hazardous areas. Special conditions for safe use. Added: Must be installed
in accordance with Siemens control drawing A5E32778336A.
02/2017
• First edition
1.3
Device documentation package
The user documentation package for this product includes the following documents
Document
Purpose
Intended users
Availability
Operating Instruc-
tions
Contains all information needed to
• check and identify the delivered pack-
age
• install and electrically connect the
product
• commission the product, (setting pa-
rameters via HMI menu)
• operate and maintain the device on a
daily basis
• troubleshoot and remedy minor opera-
tion interruptions
Instrument techni-
cians, plant opera-
tors
• Available for download from
homepage
• Hardcopy can be purchased
via PIA Life Cycle Portal
(only English and German
versions)
Compact Operating
Instructions - Ex
Contains all information needed to
• satisfy the Special conditions for instal-
lation of Ex-certified products
Instrument techni-
cians, plant opera-
tors with special
training in systems
for hazardous are-
as.
• On documentation disk
• Available for download from
homepage
• Hardcopy can be ordered
via PIA Life Cycle Portal
Functions Manual Contains
• descriptions of all functions that can be
accessed via the local display (HMI)
• guide to setting parameters to obtain
optimum operation of the device
Instrument techni-
cians, plant opera-
tors
• Available for download from
homepage