Siemens SITRANS F FST030 - Quick Commissioning Wizard

Commissioning
6.6 Commissioning via local display
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC
55
①
Wizard name
②
Step name / Parameter name
③
View number / Total views in wizard
The purpose of the wizards is to guide you through a quick set-up of various parameters.
The following wizards are available:
● Quick commissioning
● Sensor settings
● Process values
● Inputs and outputs
● Copy configuration
Use the
and keys to highlight the desired HMI wizard and press right key to enter the
wizard.
The first view in each wizard (About) is a description of which settings/actions can be
performed using the specific wizard.
The last view in each wizard (Finished) shows that the last step of the wizard was
completed.
Table 6- 1 Key functions - wizards
Key
Function
Leave menu without saving changes
Scroll up in list of options
Scroll down in list of options
Select option.
Confirm selection and save setting.
When you reach the end of the wizard, e.g. "The Process values wizard is now fin-
ished.": return to wizard list
6.6.1.2
Quick commissioning wizard
The Quick commissioning wizard will guide you through configuration of parameters
essential for your application. You configure parameters essential for your application by
selecting the configuration path and sub-wizards appropriate for your application.