Commissioning
6.6 Commissioning via local display
SITRANS F Ultrasonic flowmeters FST030 (HART)
64 Operating Instructions, 08/2017, A5E35971532-AC
Frequency output – channels 2 to 4
You can assign the process value, and you can set the direction, the damping value, the
lower range value, the upper range value, and the fail-safe behaviour.
Pulse output – channels 2 to 4
You can assign the process value, and you can set the direction, the polarity, the
redundancy mode, the pulse width, pulse width units, pulse units amount per pulse, and the
fail-safe behaviour.
To Next Page
Loading...
