Siemens SITRANS F M MAG 5000 - Changing Language

Commissioning
6.7 Changing language
SITRANS F M MAG 5000/6000
46 Operating Instructions, 12/2013, A5E02338368-002
6. Use select key to move cursor to line 3.
7. Use change key to select desired setting.
8. Press lock/unlock key to confirm new setting.
9. Repeat steps 1-8 for each requested menu.
Showing/hiding menus in operator menu
1. Use forward key to reach requested menu.
2. Press lock/unlock key to unlock setting.
3. Use select key to move cursor to / symbol.
4. Press change key to select visible ( ) or hidden ( ).
5. Press lock/unlock key to confirm new setting.
6.7 Changing language
It is possible to change language in transmitter. Default language is English, but it can be
changed to various other languages.
Change language as follows:
1. Press top up key for 2 sec.
2. Enter password.
3. Use forward key or backward key to reach language menu.
4. Press lock/unlock key to unlock language.
5. Use change key to select desired language.
6. Press lock/unlock key to confirm new language.
7. Press top up key two times to exit setup mode.