Siemens SITRANS F M MAG 5000 - A.4 Digital output - pulse

Menu diagrams
A.7 Error number
SITRANS F M MAG 5000/6000
Operating Instructions, 12/2013, A5E02338368-002 79
A.7 Error number
A.8 Direction/limit
A.9 Batch
1)
Visible only on Digital output.
Note
If batch function is chosen on the relay output, the digital output will be turned off if it has
been set up for pulse, frequency or batch.
If digital output is set up for pulse, frequency or batch, then the relay output will be turned off
if it has been set up for batch.