Siemens SITRANS F Modbus RTU RS 485 - Installing and Mounting; General Installation Notes

Installing/mounting
3
This chapter describes the HW installation procedure for the add-on module on Siemens Flow
Instruments USM-II transmitters.
The Module can be installed into SITRANS FC MASS 6000 and SITRANS FM MAG 6000
transmitters.
Note
Not allowed for use in hazardous areas
The Communication module is NOT allowed for use in hazardous areas.
Modbus RTU RS 485
Operating Instructions, 03/2021, A5E00753974-AB 11