Siemens SITRANS F Modbus RTU RS 485 - MODBUS Driver Settings

MODBUS regis‐
ter
MODBUS ad‐
dress
No. of bytes Data type Description Read / write
4:03023 3022 4 Float Totalizer 1 (customer unit
2)
) R
4:03025 3024 4 Float Totalizer 2/Batch (customer unit
3)
) R
1)
As de󹪝ned in MODBUS register 4:02907
2)
As de󹪝ned in MODBUS register 4:02913
3)
As de󹪝ned in MODBUS register 4:02915
Table A-2 Process data, MASS 6000
MODBUS regis‐
ter
MODBUS ad‐
dress
No. of bytes Data type Description Read / write
4:03001 3000 4 Float Absolute Mass󹪞ow (kg/s) R
4:03003 3002 4 Float Absolute Volume󹪞ow (m
3
/s) R
4:03005 3004 4 Float Absolute Density (kg/m
3
) R
4:03007 3006 4 Float Sensor temperature (°C) R
4:03009 3008 4 Float Fraction A (kg/s) R
4:03011 3010 4 Float Fraction B (kg/s) R
4:03013 3012 4 Float % fraction A (%) R
4:03015 3014 8 Double Totalizer 1 (kg or m
3
) R
4:03019 3018 8 Double Totalizer 2/Batch (kg or m
3
) R
4:03023 3022 4 Float Totalizer 1 (kg or m
3
) R
4:03025 3024 4 Float Totalizer 2/Batch (kg or m
3
) R
4:03100 3099 2 Byte Update rate set:
1. Reserved
2. All process data updated with 2 Hz
3. Like set 1, but with Mass󹪞ow 10 Hz
4. Like set 2, but with Totalizers 5 Hz
5. Like set 1, but with Mass󹪞ow 30 Hz
R/W
See also
Display settings (Page 53)
A.2 MODBUS driver settings
Table A-3 MODBUS driver settings
MODBUS regis‐
ter
MODBUS ad‐
dress
No. of bytes Data type Description Read / write
4:00501 500 2 Word No. of ParityErrors R
4:00502 501 2 Word No. of FramingErrors R
4:00504 503 2 Word No. of CRC Errors R
Modbus holding registers
A.2 MODBUS driver settings
Modbus RTU RS 485
38 Operating Instructions, 03/2021, A5E00753974-AB