3.2 MAG 6000 I
The installation of the add-on module on a SITRANS FM MAG 6000 I is completed as follows:
1. Open the transmitter
WARNING
Electric shock
Do not open the transmitter while power is on.
2. Press the add-on module in the direction shown until it stops and is rmly seated in
position
3. Reinsert the complete transmitter module
WARNING
Installation in hazardous area
The communication module is NOT approved for use in hazardous area.
Installing/mounting
3.2 MAG 6000 I
Modbus RTU RS 485
14 Operating Instructions, 03/2021, A5E00753974-AB
To Next Page
Loading...
