Siemens Sitrans F Series Compact Operating Instructions

1.4 Designated use
Use the device in accordance with the information on the nameplate and in the Technical data
(Page 57).
NOTICE
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
1.5 Product compatibility
Edition Remarks Product compatibility Compatibility of device integration package
09/2019 Manual upda‐
ted
Compact FW revision 4.xx.xx-xx
Remote FW revision 4.xx.xx-xx
Service channel: SIMATIC
PDM V8.2 Service Pack 1 or
later
EDD: 5.00.01 or later
Modbus: SIMATIC PDM V8.2
Service Pack 1 or later
EDD: 5.00.01 or later
HART: SIMATIC PDM V8.2
Service Pack 1 or later
EDD: 5.00.01 or later
HART: SITRANS DTM V4.1 DTM: 5.00.01 or later
HART: AMS Device manager
V12 or later
EDD: 5.00.01 or later
PROFIBUS: SIMATIC PDM
V8.2 Service Pack 1 or later
EDD: 1.00.01 or later
PROFIBUS: SITRANS DTM
V4.1
DTM: 1.00.01 or later
06/2017 First revision HW revision 03
Compact FW revision 4.xx.xx-xx
Remote FW revision 4.xx.xx-xx
Service channel: SIMATIC
V8.2 Service Pack 1 or later
EDD: 5.00.xx-xx
Modbus: SIMATIC V8.2 Serv‐
ice Pack 1 or later
EDD: 5.00.xx-xx
HART: SIMATIC V8.2 Serv‐
ice Pack 1 or later
EDD: 5.00.xx-xx
HART: SITRANS DTM V4.1 EDD: 5.00.xx-xx
HART: AMS Device manager
V12
EDD: 5.00.xx-xx
PROFIBUS: SIMATIC V8.2
Service Pack 1 or later
EDD: 1.00.xx-xx
PROFIBUS: SITRANS DTM
V4.1
EDD: 1.00.xx-xx
Introduction
1.5 Product compatibility
SITRANS FC430
12 Compact Operating Instructions, 09/2019, A5E39940293-AB

Siemens Sitrans F Series Specifications

General

Measurement Principle	Coriolis, Electromagnetic, Ultrasonic
Communication Protocols	HART, PROFIBUS, Foundation Fieldbus, Modbus
Pressure Range	Varies by model (e.g., up to 400 bar for some models)
Power Supply	24 V DC or 110-230 V AC
Protection Class	IP67, IP68
Housing Material	Stainless steel, aluminum
Liner Material	PTFE, PFA, rubber
Electrode Material	Stainless steel, Hastelloy, platinum