3. Push cable through open gland and cable path.
4. Restore ferrule and tighten cap to lightly hold cable in place.
5. Connect ground to terminal and power to terminals L/+ and N/- using wiring tool in the
manner shown below at right.
① L/+
② N/-
③ Protective Earth (PE)
AC connection DC connection
Power: 100 to 240 V AC, 47 to 63 Hz
Power: 19.2 to 28.8 V DC
6. Close and latch power supply terminal protection cover.
7. Tighten cable gland.
Connecting
4.2 Connecting FC430
SITRANS FC430
44 Compact Operating Instructions, 09/2019, A5E39940293-AB
To Next Page
Loading...
