Siemens Sitrans F Series - Alarm Letter Codes and Descriptions

Troubleshooting/FAQs
4.2 Alarm Letter Codes and Descriptions
SITRANS FUH1010 Quick Start
Operating Instructions (Compact), 12/2008, CQO:QSG010 Revision A
37
4.2 Alarm Letter Codes and Descriptions
Letter Code Alarm Description
S Spacing Transducer spacing may need readjustment.
0 ZeroMatic ZeroMatic signal fault.
E Empty Pipe is empty.
R Rate Flow above High setting or below Low setting.
F Fault Three continuous seconds without new data update.
A Aeration Current aeration percentage exceeds the alarm set point.
M Memory Last valid reading for a selected interval during Fault condition.
K Makeup In-Process Makeup occurred.
I Interface Liquid Vs exceeds interface alarm set point.
P Pig Pig passage detected (optional).
The display shown below indicates where the Alarm Codes appear on the LCD display
screen.

PV
6
① Alarm Codes