SFIDK.PS.029.E5.02 / SW 2.01.07
23
Example 2
Change pulse unit from m
3
/Imp to l/Imp and pulse value from 10 m
3
/Imp to 10 l/Imp.
The current setting appears in display.
.4.2Digital outp1
.3Pulsevalue
.4.2.3Unit
m 3 / I m p
.4.2.3Unit
l / I m p
.4.2.3PulseRate
+
1000. 0000 l / I mp
.4.2.3PulseRate
+1 0
. 0000 l / I mp
.4.2.3PulseRate
+1. 000
0l/Imp
.4.2Digital outp1
.3Pulsevalue
Enable the programming.
Second display line flashes.
Scroll through using
until “l/Imp”
appears in display (flashing).
Press the
key to select “l/Imp”.
Display now shows (1000.000 l/Imp)
and first digit flashes.
Press
to move cursor to the decimal
point. Then move cursor 2 places to the left
using .
Confirm input by using to move cursor to
the far right position (enter function).
Display returns to the start viewing. The
change in setting is made and stored.
The normal display view is reached by
repeatedly pressing the key .
To Next Page
Loading...
