Menu Screens
4.2 Connection Screen
Si-Ware Quick Start
18 Programming Manual, 10/2011, A5E02951525-03
4.2 Connection Screen
The [Connection] screen indicates when Si-Ware and the flowmeter are successfully
connected and communicating. When serial communication is completed "Connected" will
appear at the bottom left of the Si-Ware screen and the [Connect] screen will close.
4.3 Graphs Menu
Si-Ware has two graph screens: Signal Graph and Trend Graph. They are selected by
clicking the left mouse button on [Graphs] in the Si-Ware menu bar.
Signal Graph
The Signal Graph screen allows you to view real-time digitized receive signals for any
flowmeter channel including the ZeroMatic signal. This feature is useful for diagnosing
waveform problems.
To select the Signal Graph:
Note
To view a Signal Graph, firs
t establish a flowmeter connection using the [Connection] and
[Connect] menus.
To Next Page
Loading...
