Menu Screens
4.3 Graphs Menu
Si-Ware Quick Start
20 Programming Manual, 10/2011, A5E02951525-03
Menu Choices Description
Meter Channel Allows you to select any one of the active
measurement channels.
Signal Type Select "Fluid" for the receive signal that
traverses the flowing liquid or gas.
Select "ZeroMatic" for the pipe wall signal (if
enabled).
Graph Type Select "Signal" to view the actual unprocessed
digitized receive signal.
Select "Envelope" to view the rectified and
smoothed waveform.
Meter Query Select "Continuous" for continuous update (or
refresh) of graph.
Select "Once" for a single snapshot of the
graph.
Signal Resolution Selecting a lower resolution will allow Si-Ware
to update the graph more frequently when
"Continuous" mode is selected.
Correlated Check to view the signal graph in correlated
mode, uncheck for delta-time mode.
4. If the [Stop] button is pressed or if a single query has completed, press the [Query] button
to start a new query. This will cause Si-Ware to gather signal data and display it in the
manner selected.
5. Left click the [Exit] button to leave the Signal Graph screen.
To Next Page
Loading...
