Menu Screens
4.4 Diagnostics Menu
Si-Ware Quick Start
24 Programming Manual, 10/2011, A5E02951525-03
To select the Meter Diagnostic Screen:
1. Position the cursor over [Diagnostics] and click the left mouse button. The [Meter
Diagnostic] screen will appear on the drop-down list.
2. Click on [Meter Diagnostic] and the screen begins gathering data automatically.
Note
The Si-Ware trend line gr
aph operates with the same parameters and functions as the
Trend Graph described above.
3. Si-Ware will gather the flowmeter data and display it as shown in the example below.
Note that for a single operating channel the Path Flow and VoS deviation bar graphs will
not appear. These bar graphs are only applicable to multi-path flowmeters.
To Next Page
Loading...
