Menu Screens
4.4 Diagnostics Menu
Si-Ware Quick Start
Programming Manual, 10/2011, A5E02951525-03
29
Stored Events
The [Stored Events] screen displays the retrieval of events stored in the flowmeter for a
current site, all sites or a specific site. Stored events are changes in flowmeter conditions
(e.g. a warning condition changing to an alarm condition).
Note
The [Alarms/Warning Storage] function in the [Setup] menu must be activated before
flowmeter condition changes will be stored by the flowmeter.
[Stored Events] Function Setup
1. The [Stored Events] function must be enabled in the Setup Menu (Page 14) by selecting
the [Alarm/Warnings Setup] sub menu.
2. After allocating flowmeter memory space for storing events, left-click the [Enable
Alarms/Warning Storage] box.
3. To enable the function left-click the [Apply] button and then the [Exit] button.
Retrieving Stored Events
1. In the [Diagnostics] menu select the [Stored Events] sub menu.
2. Select one of the [From Site(s)] options.
3. Click the [Retrieve] button to view the stored events.
4. To clear previously stored events, select the [Clear Memory] option.
To Next Page
Loading...
