Connecting
5.6 SITRANS LVS200 Pipe extension version
SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
33
Suggested tools:
● medium Phillips or 6 to 8 mm (¼”) flat screwdriver
● 3 mm (1/8”) flat screwdriver
● wire cutters
● wire strippers
● terminal crimper
● 36 mm open end wrench
● pipe wrench
Customer supplied pipe extension
1. Open the enclosure lid; remove electronics module.
2. Lead the sensor cable through the customer supplied 1" tube and enclosure.
3. Assemble the fork assembly, the pipe extension, and the enclosure using the 36 mm
open end wrench. Seal the pipe threads with an appropriate sealant.
Note
Do not turn fork assembly. Do not bend the fork during assembly.
To Next Page
Loading...
