Siemens SITRANS L Series - 7 Technical Data

SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
38
Technical data
7
Note
Device specifications
Siemens makes every attempt to ensure the accuracy of these specifications but reserves
the right to change them at any time.
Power
LVS100 19 to 230 V AC, ±10 %, 50 to 60 Hz, 22 VA / 19 to 40 V DC,
±10 %, 2 W
LVS200 19 to 230 V AC, +10 %, 50 to 60 Hz, 1.8 VA / 19 to 55 V DC,
+10 %, 1.5 W
18 to 50 V DC 3-wire PNP
7 to 9 V DC (requires NAMUR switch amplifier) NAMUR IEC
60947-506, 2-wire
8/16 mA or 4 to 20 mA; 12.5 to 35 V DC, 2-wire
Performance
Measuring frequency
LVS100
standard
approx. 200 Hz
LVS200
standard
approx. 125 Hz
liquid/solid interface
version
approx. 350 Hz
enhanced sensitivity
option
approx. 90 Hz
Signal delay probe uncovered to
covered
approx. 1 second
probe covered to un-
covered
approx. 1 to 2 seconds
Relay delay
(DPDT version)
(LVS200)
adjustable up to 30 seconds
Sensitivity
high or low, switch selectable
Minimum material density
LVS100
standard version
approx. 30 g/l (1.9 lb/ft³)
LVS200
standard version
approx. 20 g/l (1.2 lb/ft³)
standard version with
low density fork
approx. 5 g/l (0.3 lb/ft³)
liquid/solid interface
version
approx. 50 g/l (3 lb/ft³)
Maximum particle
size
LVS100
8 mm (0.32")
LVS200
10 mm (0.39")