Connecting
5.6 SITRANS LVS200 Pipe extension version
SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
35
10. Crimp the ring terminal 4 mm (0.19") to sensor earth cable.
11. Connect electronics module and terminal connection board. Be sure that all terminals are
tight.
12. Insert the electronics module into the housing. The terminal connection board is used to
guide the cable into the extension tube.
13. Fold cable as shown in diagram above.
14. Secure the electronics module as shown in diagram below.
Connect protection earth of the enclosure to terminal of the electronics module.
Connect earth cable of the fork to the electronics earth terminal.
To Next Page
Loading...
