Siemens ST750 - INTRODUCTION; Purpose of this handbook; Contact Us; Reference Documents

ST750 GENERAL HANDBOOK
667/HB/33750/000 Page 11 Issue 6
1. INTRODUCTION
1.1 Purpose of this handbook
The purpose of this handbook is to give a general description and specification of
the ST750 Rack Assembly and the procedures for its Installation, Commissioning
and Maintenance in the ST750 Cabinet Assembly and other Cabinets. Also provided
is guidance on testing and maintenance procedures.
Note
Ongoing development means that some of the delivered items may
differ in detail from the information included in this handbook.
1.2 Contact Us
If you have any comments on this handbook, or need any further information, you
can contact us at trafficwebmaster.stc@siemens.com.
1.3 Reference Documents
1.3.1 Non-Essential Documents – Intersection Design
Publisher
Reference Number
Document Title
1.
Siemens
667/DS/20664/000
Traffic Signal Junction Cable Design &
Certification
2.
Siemens
667/HE/31699/000
Loop Inductance and Turns Calculation
Spreadsheet
3.
Siemens
667/DZ/33750/000
ST750 Family Tree
1.3.2 Essential Documents – Controller
Publisher
Reference Number
Document Title
4.
Siemens
667/SU/32900/000
ST900/750 Family Firmware and
Hardware Configurations
5.
Siemens
667/HH/32900/000
ST900/750 Family Handset Handbook
6.
Siemens
667/HB/32900/000
ST900 General Handbook
7.
Siemens
667/HB/33750/000
ST750 General Handbook (This
document)
8.
Siemens
667/DA/27880/000
ST750 UK Power Circuit Diagram
9.
Siemens
667/DA/27880/006
ST750 Non-UK Power Circuit Diagram
10.
Siemens
667/GA/33750/ETC
ST750 ELV Controller Cabinet Cabling
11.
Siemens
667/CC/32750/000
ST750 Family Controller Configuration
12.
Siemens
667/HB/32921/007
Handbook Supplement for Monitoring
Helios CLS (NLM) Signals