ST750 GENERAL HANDBOOK
667/HB/33750/000 Page 87 Issue 6
prevent the incorrect connection between PL6 and PL7. For more
details see the following diagram:
Figure 34 - Connector PL6
5.12 REGULATORY SIGNS MONITORING
The ST750 Rack Assembly does not cover regulatory signs and their associated
monitoring. There is a fuse position labelled ‘F3 Detector’ which could be used to
supply regulatory signs if required. Their monitoring would require standard current
coils to be connected to the external analogue inputs.
5.13 PCB SWITCHES, FUSES, LINKS AND FIRMWARE
The switches, fuses and link settings are related to the hardware options; their
locations and option selections are shown in Sections 5.13.1 and 5.13.2.
To aid the location identification an overview of each card is also given:
To Next Page
Loading...
