EDM eco
Operating instructions Unit settings
TU00-1404-0311020 © Siemens VDO Trading GmbH 35
Edition 11/2003
English
Entering/ Amending cost factors
You can use the EDM eco to calculate and display journey costs (-> 15).
1 Press the key and the key at the same time to switch to the unit
settings.
The first menu item 86(U6HW83 will be displayed automatically.
2 Select the 6\6W(6HW83>6HW836\6W(>&26W6HW83 (-> 27) menu item
(-
> 31).
If PIN protection has already been activated, you will automatically be asked
to enter the system PIN number in the place indicated (-> 24).
3In the &26W6HW83 sub menu enter the required cost factors one after the other in
your national currency:
–
)8(/ - Consumption dependent costs (per litre of fuel)
– G,67 - Costs dependent on wear and tear (cost per kilometre travelled)
– W,Q( - Time dependent costs (costs per hour of journey time).
Values are entered in the same way as PIN numbers (-> 24).
4 Confirm the individual entries by pressing the key and scroll to the
next value to be entered with the key.
5 After you have completed all entries, press the key until you return to the
normal display mode.
To Next Page
Loading...
