Siemens VDO EDM eco Release II - Safety certificate

EDM eco
Operating instructions Unit settings
TU00-1404-0311020 © Siemens VDO Trading GmbH 45
Edition 11/2003
English
Setting maximum driving time
You can monitor maximum driving times with the EDO eco. If the maximum driving time is up the
driver will receive an audible and visual warning signal (-> 17).
If you wish to deactivate this function, simply reset the value entered to "000".
1 Press the key and the key at the same time to switch to the unit
settings.
The first menu item 86(U6HW83 will be displayed automatically.
2 Select the 6\6W(6HW83>6HW836\6W(>U30$6HW83>W,0$6(W83(-> 27) menu
item (-
> 31).
If PIN protection has already been activated, you will automatically be asked
to enter the system PIN number in the place indicated (-> 24).
3At W,0$enter the required maximum driving time period in minutes.
Values are entered in the same way as PIN numbers (-> 24).
4 Confirm the entry using the key.
5 After you have completed all entries, press the key until you return to the
normal display mode.