Siemens VDO EDM eco Release II - Calculating fuel consumption calibration values

EDM eco
Unit settings Operating instructions
40 © Siemens VDO Trading GmbH TU00-1404-0311020
Calibration values for fuel consumption and distance travelled
When setting up the system your dealer will set calibration values specific to the vehicle type. As,
however, there can be differences from vehicle to vehicle, e. g. because of the tyres fitted, you
have the option of correcting the calibration values.
1 Press the key and the key at the same time to switch to the unit
settings.
The first menu item 86(U6HW83 will be displayed automatically.
2 Select the86(U6(7XS>8Q,W66\6W((-> 27) menu item (-> 31).
3 Select the required unit.
4 Confirm the selection using the key.
5 After you have completed all entries, press the key until you return to the
normal display mode.