Signal SDS Series - Weather Station Integration

SDS Series
45
VIEW INPUTS: (inputs within the physical terminal strip)
INPUTS
< Press Enter >
Pressure Sensor
< Press Enter >
From the Time and
date display scroll
View Inputs
< Press Enter >
PR WMA WAHSLP
000 000 000000
Display as kPa
0 = contact open
1 = Contact closed
PR Analog input Pressure
WMA Water Level (SDS-100)
W Water Meter no 1
A Auxiliary Pump
H High Pressure
S Skip Pressure
L Low Pressure
P Program Start
DATANODE STATUS FROM “VIEW DATANODE” DISPLAY:
< Add. 01 Add. 02 >
X00 (##) X00 (##)
DataNode Address
F1 and F2 Frost sensor 1 and 2
PA Pause sensor
PS Program stop sensor
RO Rain off sensor
WM (xx) Water meter counter
MO Moisture sensor
X “not online”
Ö “online”
00 CN DataNode not counting or awaiting pulse
0x Pulses left in CN DataNode buffer
99 SW DataNode activated
99 SW DataNode not activated
Shown as a per-
centage
Programming
WEATHER STATION:
Program adjustments via Weather Station evapotranspiration is available by connecting a Sig-
nal WeatherHawk Weather Station to SignalCloud.
Instructions available separately with weather station purchase.