EasyManua.ls Logo

Silvercrest SSM 1000 A2 - Page 49

Silvercrest SSM 1000 A2
78 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
GB
open the pressure valve until only a little steam is coming out. Nev-
er use force to open the device.
~
Place the device in a stable position by using the handles, in order
to prevent the hot liquid from spilling.
~
If the mains power cable of this device becomes damaged, it must
be replaced by an equivalent power cable. Contact the our custom-
er service.
~
The base unit, the mains power cable and the mains plug must not
be immersed in water or other liquids.
~
If liquid should enter the base unit, pull out the mains plug immedi-
ately. Have the device checked before reusing.
~
This device is not intended to be operated using an external timer
or a separate remote control system.
~
In order to avoid overheating, the device must never be covered.
Heat can otherwise accumulate in the device.
~
Do not lean over the device …
when you open the lid and the contents are still hot, and
when hot steam escapes from the device.
~
Ensure that no body parts (e.g. hand or arm) are above the pres-
sure valve when you open this using the pressure valve button and
steam escapes. There is a danger of being scalded by escaping
steam.
~
This device is equally intended for use in the home and in applica-
tions similar to the home, such as for example...
in kitchens for staff in shops, offices and other commercial set-
tings;
on agricultural properties;
by customers in hotels, motels and other residential facilities;
in bed-and-breakfast establishments.
~
Make sure that no liquid overflows onto the device plug connec-
tion.
~
Remember that the surface of the heating element remains hot after
use.
~
Do not use any abrasive or corrosive cleaning agents.
__367792_2101_Schnellkochtopf_CY.book Seite 47 Mittwoch, 9. Juni 2021 10:18 10

Table of Contents

Related product manuals