CM5_UM_ 9752090319_GB_V0_9 42 / 67
6000 Menu for changing advanced generator settings.
6100 Submenu with general settings for the generator.
6200 Submenu for limiting the HV output.
6300 Submenu for the Remote HV on/off settings.
6310 Configuring the external on/off input mode.
6311 External control is disabled, and the high voltage that is
entered is immediately set on the output.
6312 External control is disabled, and the high voltage that is
entered is set via information in the communication protocol.
6313 External control is enabled, and the high voltage that is
entered is set via the external input.
6400 Submenu for the Advanced Output Control mode settings.
6500 Submenu for the display settings.
6600 Submenu for the settings for the analogue I/O inputs and outputs.
6700 Submenu with information about the generator.
6800 Menu for restoring the factory settings for the generator.
To Next Page
Loading...