
Do you have a question about the Simco CM5 and is the answer not in the manual?
| Rated Watts | 5000 |
|---|---|
| Fuel Type | Gasoline |
| Power Output | 120/240V |
| Engine Type | 4-Stroke OHV |
| Noise Level | 68 dB |
| Starting Method | Recoil |
| Outlet Types | 2x 120V 20A (5-20R), 1x 120/240V 30A (L5-30R) |
Critical warnings regarding electrical installation, high voltage, and proper earthing.
Details on required power, output voltage/current, and voltage stabilization.
Guide to connecting high-voltage cables, earth wires, and power.
Details on using the 25-pin sub-D connector for external control and status.
How to switch the high voltage on/off using an external signal.
Using analogue signals for setting voltage and current.
Guided setup process for initial generator configuration.
Setting up CM5 as ECM, with Anybus, or in specific operating modes.
Unlocking the menu and descriptions of the generator's keys.
Adjusting voltage/current setpoints and locking/unlocking the keyboard.
Operating the generator remotely, via fieldbus, or external HV switching.
Resolving the 'Too many ARCs error' and other issues.
Table listing common problems, their causes, and solutions.
Description of Advanced Current Control (AdvCC) and Advanced Output Control (AdvOutC).
Loading...