Smart Machine Smart Decision
SIM808_Hardware Design_V1.00 2014.03.27
63
Appendix
A. Related Documents
Table 53: Related documents
SN Document name Remark
[1] SIM800_AT Command
Manual
SIM800 AT Command Manual
[2] AN_SIM900_TCPIP TCP/IP Applications User Manual
[3] SIM900_Multiplexer User
Manual_Application Note
SIM808 Multiplexer User Manual Application Note
[4] AN_SIM900
Series_Update Tool_UGD
SIM808 Series Update Tool User Guide
[5] AN_SIM900_AUDIO Applications Note About SIM808 Audio
[6] AN_SIM900_Audio
LINE-IN input
Applications Note About SIM808 LINE-IN Input
[7] SIM900_Embedded AT
Application Note
SIM808 Embedded AT Application Note
[8] AN_Serial Port Application Note About Serial Port
[9] AN_SIM900-TE PCB
Layout & Schematic for
Reference
Application Note About SIM808-TE PCB Layout & Schematic
[10] Module
secondary-SMT-UGD
Module secondary SMT User Guide
[11] ITU-T Draft new
recommendation V.25ter:
Serial asynchronous automatic dialing and control
[12] GSM 07.07: Digital cellular telecommunications (Phase 2+); AT command set for GSM
Mobile Equipment (ME)
[13] GSM 07.10: Support GSM 07.10 multiplexing protocol
[14] GSM 07.05: Digital cellular telecommunications (Phase 2+); Use of Data Terminal
Equipment – Data Circuit terminating Equipment (DTE – DCE) interface
for Short Message Service (SMS) and Cell Broadcast Service (CBS)
[15] GSM 11.14: Digital cellular telecommunications system (Phase 2+); Specification of
the SIM Application Toolkit for the Subscriber Identity Module – Mobile
Equipment (SIM – ME) interface
[16] GSM 11.11: Digital cellular telecommunications system (Phase 2+); Specification of
the Subscriber Identity Module – Mobile Equipment (SIM – ME) interface
[17] GSM 03.38: Digital cellular telecommunications system (Phase 2+); Alphabets and
language-specific information
[18] GSM 11.10 Digital cellular telecommunications system (Phase 2)； Mobile Station
(MS) conformance specification； Part 1: Conformance specification
To Next Page
Loading...
Need help?
General
