Simex MultiCon CMC-99/141 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
•
from logical channel
- allows to run the profile a number of times that equals
the value in the selected logical channel determined by the
Looping source
parameter,
•
infinite
– allows to repeat the generated
Profile
infinitely,
–
Loop count
– this parameter is visible only if the
Looping
parameter is set as
counted
, defines the number of repetitions of the generated Profile,
–
Looping source
– this parameter is visible only if the
Looping
parameter is set as
from logical channel
. It allows to choose a logical channel from the list, whose
value will be compared with the number of already made cycles of the Profile,
–
Return to position
– this parameter is invisible if the
Looping
parameter is set as
disabled
, allows to select a fixed position from which every next generated Profile
has to start,
Fig. 7.109. Sample of Profile/timer
192
1 2 3 4 5 6
Profile
Time [s]
Idle value
Section num.: 1 2 3 4 5

Simex MultiCon CMC-99/141 Specifications

General

Brand	Simex
Model	MultiCon CMC-99/141
Category	Controller
Language	English