Simex MultiCon CMC-99/141 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.15. MODBUS
The basic version of
MultiCon CMC-99/141
has one RS-485 port built-in. The
communication ability can be increased by installing a communication module into slot D of
the device (
Fig. 7.150
). This module offers 2 additional serial ports (one RS-485, and one RS-
485/RS-232) and one ethernet port, which allows the creation of an advanced Multi-Modbus
system. In the current software version, a MODBUS RTU and MODBUS TCP/IP protocol are
available and every port can be switched to the Slave or Master (except port 4 which can be
only SLAVE) mode.
To establish a connection between MultiCon and another device using TCP/IP
protocol, port number 502 must be unlocked in the software and hardware firewall.
234
i
Device configuration
MENU
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
E-mail notifications
Modbus

Simex MultiCon CMC-99/141 Specifications

General

Brand	Simex
Model	MultiCon CMC-99/141
Category	Controller
Language	English