Simex MultiCon CMC-99/141 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
4.4. MAINTENANCE
The unit does not have any internal replaceable or adjustable components available to
the user. Pay attention to the ambient temperature in the room where the unit is operating.
Excessively high temperatures cause faster ageing of the internal components and shorten
the fault-free time of the unit's operation.
In cases where the unit gets dirty, do not clean with solvents. For cleaning use warm water
with a small amount of detergent, or in case of more significant contamination ethyl or
isopropyl alcohol.
Using any other agents can cause permanent damage to the housing.
Products marked with this symbol should not be placed in municipal waste. Please
check local regulations for disposal of electronic products.
5. INTRODUCTION TO MultiCon CMC-99/141
5.1. UNDERST ANDING CONTROLLER/DATA RECORDER MultiCon CMC-99/141
The
MultiCon CMC-99/141
device has been developed as a universal multichannel
controller. To maintain this concept its firmware has been written with a multi-level structure.
The device runs under the control of a LINUX operating system keeping all subsystems ready
to use and allowing independent and simultaneous operation of many processes
(communication, data acquisition, post-processing, visualisation etc.). Such an approach
offers great advantages to high level applications, making it flexible and dynamically
configurable. Similarly, data structures and streams have been implemented in quite a
different way than in most similar devices. The main difference is the concept of using
Logical Channels
as a bridge: physical inputs and outputs - visualisation and controlling
processes. Designers of
MultiCon CMC-99/141
decided to use such a solution to increase
the functionality of the device and make the software almost fully independent from the
hardware.
31
!

Simex MultiCon CMC-99/141 Specifications

General

Brand	Simex
Model	MultiCon CMC-99/141
Category	Controller
Language	English