Simex MultiCon CMC-99/141 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Attachment with
Groups
has the following structure:
File name:
serial_number_
Gr_
data
_
hour
_
minute
_
second
_msgID=
Message_number
_
Suffix
.csv
File content – first row:
“Group Number”,”Group Name”,“Channel Number”,”Channel Name”,”Value”,”Unit”
File content – next rows:
Group_number
,”
Group_name
”,
Channel_number
,”
Channel_name
”,
Channel_value
,”
Unit
”
Each Logical channel from each Group is stored in a new line of the file.
Where: in
black
constant elements are written,
in red are written the elements which are dependent on triggering and the device
state but all of these elements must be included.
The content of the attached file can be slightly different depending on
the
Decimal separator
parameter (see description of the
Decimal separator
parameter in
Chapter 7.7. GENERAL SETTINGS
)
In case when the channel selected to send I disabled (or a Group with a disabled
Channel) the name of this Channel will be
“disabled”
and its unit will be
“null”
.
Alarm states (-ERR-, -LO-, -HI- etc.) of Logical channels are not included in the
attachment but only the current values.
The parameters on the E-mail notifications menu are:
–
E-mail configuration
– menu which contains the sender account parameters,
•
Mode
– switches e-mail notifications on and off:
◦
disabled
,
◦
enabled
,
•
Sender name
– text which will be displayed in the Name field in the user's e-
mail account.
•
Sender address
– sender e-mail address which will be used by the device to
send messages to recipients,
•
Login
– sender e-mail account login,
•
Password
– sender e-mail account password (every sign is displayed as an
asterisk,
•
SMTP server
– sender e-mail account server address,
•
SMTP port
– sender e-mail account server port number,
•
Security
– security mode which is used by the sender's e-mail server,
◦
none
– no security,
◦
STARTLS
– establishes TLS encryption in a network connection when
communication with server is realized on unencrypted port,
◦
SSL/TLS
– the server uses SSL or TLS encrypted communication on the
selected port,
•
Retry every [min]
– parameter which describes how much time must elapse
before the device will try to send messages again after failure,
–
Messages
– menu which defines up to 32 messages,
•
Mode
– switches on and off a particular message,
◦
disabled
,
◦
enabled
,
•
Recipient(s)
– parameter which contains e-mail address (addresses) of the
263
i
i
i

Simex MultiCon CMC-99/141 Specifications

General

Brand	Simex
Model	MultiCon CMC-99/141
Category	Controller
Language	English