External antennas
An external antenna (see
Accessories [}17]
) improves reception when
correctly positioned. Connect the antenna to the intended slot and adjust
the antenna so that the signal strength at the LockNode is improved.
5.5.1.1 Assigning LockNodes to another RouterNode
The signal quality of the radio link between RouterNodes and LockNodes
(and other RouterNodes) is influenced, among other things, by the
following:
Environmental conditions (interference signals, building materials)
Centres distance
You can improve these conditions and thus the signal quality of the radio
link between RouterNodes and LockNodes by assigning the LockNode to a
RouterNode that is closer or less disturbed.
As long as you move the LockNode within the same CentralNode/Ethernet
RouterNode segment, you can easily reassign the LockNode as described
below. Otherwise, reset the LockNode in the WaveNet Manager and re-
insert it at the planned RouterNode (see
Best Practice: Reset with the
WaveNet Manager [}159]
und
Adding Lock Nodes to WaveNet [}59]
).
Reassigning a single LockNode to a RouterNode
ü WaveNet Manager opened via LSM (see
Best Practice: From the LSM
software [}37]
)
1. Right-click on the LockNode entry that you want to assign to another
RouterNode.
9 The window "Administration" opens.
WaveNet (Manual)
5. WaveNet Manager
144 / 210
To Next Page
Loading...