SimonsVoss WaveNet - Item Numbers; Routernodes

RS-485
Bus cabling for connection to the
network:
 RouterNodes
 Wired LockNodes
4.2 Item numbers
The WaveNet consists of different devices. You can configure your
WaveNet according to your needs.
4.2.1 RouterNodes
The item codes of the RouterNodes are made up of modules (which
change depending on the product characteristics).
WNM .RN2 .E R .IO
 WNM
(WaveNet-
Manager →
Addressing
automatically)
 WN
(WaveNet →
Addressing
fixed)
Type of node:
 .RN2
(RouterNode
2)
 .RN
(RouterNode)
 .RP
(RepeaterNod
e)
 .CN
(CentralNode)
Supported trans-
mission medium
(input segment:
connection to
network):
 .E
(Ethernet →
TCP/IP)
 .R
(Radio →
868
MHz)
 .C
(Cable →
RS-485)
 .W
(WLAN →
TCP/IP)
 .U
(USB →
USB)
 .S
(Serial →
RS-232)
Optional suppor-
ted second trans-
mission medium
(output segment:
connection to
LockNodes):
 R
(Radio →
868
MHz)
 C
(Cable →
RS-485)
Optionally sup-
ported protective
function.
 .IO
(protective
router)
RouterNode portfolio
The table shows which RouterNodes support which transmission media.
WaveNet (Manual)
4. WaveNet system
14 / 210