Signal strength Signal-to-noise ratio Frequency utilisation
Devices too far away
Absorption by unfavourable
transmission media (e.g.
metal surfaces or metal
doors)
Absorption due to
unfavourable
environmental conditions
(e.g. humidity,
temperature)
Unfavourable alignment of
the antennas
Many devices on the 868
MHz band nearby
Electromagnetic sources of
interference
Electromagnetic fields
(e.g. from switching
power supplies)
Jammers
Reflective surfaces
Many devices on the 868
MHz band nearby
Unauthorised use of
spectrum
Jammers
Long transmission times or
large data volumes
4.5 Safety and alarms
Security is a top priority for SimonsVoss as a manufacturer of high-quality
equipment.
NOTE
Redundant protection of the network infrastructure
In addition to SimonsVoss security measures, the network infrastructure in
which you use WaveNet must also comply with current security standards.
1. You can meet these security standards by, for example using virtual
networks or active network monitoring (the list does not claim to be
complete).
2. talking to your IT infrastructure specialist.
4.5.1 Encryption
Communication in your WaveNet is protected against eavesdropping and
recording by means of sophisticated cryptography.
WaveNet (Manual)
4. WaveNet system
27 / 210
To Next Page
Loading...